Asko WM70 Service Manual download pdf (Page 17)

Service manual WM70

Service menu WM70.2

S10

S8S2 S3

S13

S11

S14

S12S9

S4 S5

S6 S7

LCD

Switch off, and then on main power.

•Wait for at least 5 seconds

•Press down button S6

•Turn on the power

•Pressing S6 when power on followed by 3 pushes on S6 within 5 sec enters the

service menu.

NOTE!

Make all selections. Pressing S13 stores all selections made in service menu and leaves

service mode.

Turn

Tracking data reed out

SP: (software programming date: year week

CM: (control unit manufacturing date: year week

SV1: (Software version)

SV2: (Software version)

NC: Number of cycles

Press S14 next step is accessed.

Failure reed out

Rotating J1 will display 2nd and 3rd last deviating fault, ex “Thermistor fault (2); 30” ,

“Over ﬂow (3); 20”

Failure record is cleared by total reset

Pressing S14 next step is accessed.

Diagnostics

Separate test of auxiliary components.

Rotating J1 each component will be turned on (with a 1 sec delay) and inputs

detected in sequence:

“Testing” (no component),

“Testing valve 1” (inlet valve 1 on),

“Testing valve 2” (inlet valve 2 on),

“Testing valve SM” (inlet valve 1 and 2 on),

“Testing heater” (heater on until max 60°C),

“Testing motor” (normal action),

“Testing drain” (drain pump on),

“Testing spin” (spin sequence, drain pump on),

“Testing door”.

Pressing S14 components will be off and next step is accessed.

Spin speed

Turn J1 counter clockwise 1500 rpm, 1600 rpm, 1700 rpm, 1800 rpm, default or

clockwise 1800 rpm, 1700 rpm ...

Pressing S14 next step is accessed or S13 to store or leave service mode.

Reset

By pressing S13, the machine returns to the default settings.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comments to this Manuals

No comments

Asko WM70 Service Manual Page 17

Comments to this Manuals

Related products and manuals for Washing machines Asko WM70