Asko T700 Operations Instructions Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Page 9
ENGLISH
ENGLISH
CHANGING CHANGING THE LANGUTHE LANGUAAGEGE
ON ON THE LED DISPLATHE LED DISPLAYY
There are eleven languages available for the LED
window:
To change the language, follow the steps below:
1. Turn the machine off then on again.
2. Press ENTERENTER five times in succession then press
P1 five times. (This must be done within 15 seconds.)
3. When the Language menu displays, press an Arrow
button to advance through the menu to the desired
language.
4. Once the correct language displays, press ENTER
to program the LED window to display the language
you selected.
CHILD-SAFE STCHILD-SAFE STARARTT
As a safety measure, you can program the T760 and
T780 not to start unless the Start button is held down
for three seconds. To do this, follow the steps below:
1. Turn the machine off then on.
2. Press ENTER five times, then press P3 five times.
(This must be done within 15 seconds.)
3. “Delayed start” displays with “0” flashing in the lower
right corner. Press the right Arrow button to toggle
the display to “3.”
Child-Safe Menu Button
Please note that when you set the child-safe Start button,
the Menu button is automatically programmed to delay
for three seconds before it becomes active. This
prevents a child from accidentally changing the program
settings.
When you want to change a program, press the Menu
button for three seconds to activate the menus. The
Menu button will work normally (without the 3-second
delay) until you have completed your changes. If it is not
pressed for two minutes, it will automatically revert back
to the child-safe mode.
English
French
Spanish
Portuguese
Italian
German
Swedish
Danish
Norwegian
Netherlands
Finnish
The Delayed Start Program
This program lets you delay starting the dryer for up to
12 hours. This feature is useful in areas where utility
companies offer discount rates during certain hours.
When you select Delayed Start on the program menu,
you must select a delay time (1 to 12 hours).
Menu Enter
Select time
for delayed start
< Next >
P1
0
1. In the bottom right corner of the LED window, a
clockface and a zero will flash. To change the zero,
simply press an Arrow button until the number of
hours you want to delay starting the program displays
(1–12 hours).
2. Press ENTER to program your change.
Press MENU to advance to the next menu or press
START to begin the program. When you press START,
the clockface and the hours you set for the delay will
display, as illustrated below:
Menu Enter
Extra dry
Anti-Crease 1h
Temperature normal
P1
9
RESTORING A PRESETRESTORING A PRESET
PROGRAMPROGRAM
To restore a preset program to its original settings,
simply press the button for the preset program you want
to restore and hold it down while your press ENTER.
The program will revert to its original settings.
ERRERROR MESSAOR MESSAGES – GES – T760/T780T760/T780
Error messages will display in the LED window if a
fault occurs while a program is in progress. The table
below defines each possible error message. If the
message still displays after you have checked the
possible solutions, call a service technician.
ERROR MESSAGE SOLUTION
Three hours
Overflow (T780)
Sensor
Thermistor
Make sure both fuses are intact.
Clean the lint filter.
Make sure exhaust hose is clear (T760).
Clear message by turning the power off then on.
Make sure the condensed water container is empty. If draining into a drain pipe,
make sure the black rubber hose is not kinked or blocked. The drain should not be
higher than 40 inches from the floor.
Make sure the condensation pump is not blocked.
This can appear if there are dry clothes in the drum when the unit is started. Cancel
the error message by opening the door or turning the power off then on.
Call a service technician.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments