Asko D5223 Operations Instructions download pdf (Page 35)

Customer Care Center

1-800-898-1879

www.askousa.com

4. Adjust the spring tension using one of the

following methods depending on how much

adjustment is needed.

If you need to adjust the spring a lot, place the

rear mount in another hole. Place the spring

further forward to reduce the tension and fur-

ther back to increase the tension.

If you want to make small adjustments to the

spring, hold the back end with one hand and

turn the forward mount clockwise or counter-

clockwise one or more times. Turn the mount

clockwise to increase spring tension and coun-

terclockwise to reduce spring tension.

5. Replace the back end of the spring by hold-

ing the spring at a right angle to the side of the

dishwasher and pushing the end of the spring

into the hole, then turning the spring in toward

the dishwasher.

6. Reattach the front end of the spring by pulling

it up and forward to fasten it in the mount.

7. Open the door and check the spring tension

again. If necessary, make further adjustments

as above.

Stronger door springs are available for purchase

for dishwashers fitted with a cover door. Springs

are available for various weights and sizes of

door. Door springs can be purchased from the

retailer who sold you the dishwasher.

Reduce spring tension

Increase spring tension

Reduce spring tension

Increase spring tension

Adjusting the door springs

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

No comments

Asko D5223 Operations Instructions Page 35