Asko D5223 Operations Instructions download pdf (Page 11)

Customer Care Center

1-800-898-1879

www.askousa.com

Press start

The dishwasher will now start. It manages

the entire wash automatically.

Ensure that the door is properly closed or the

machine will not start.

Changing program

If you want to change program after having

started the machine, press the Start/Stop button

for three seconds. Then select a new program

and press the Start/Stop button.

Make sure there is detergent in the dispenser.

Do you want to load more dishes?

Carefully open the door; the machine will stops

automatically, put in the dishes, close the door

and the dishwasher will continue from where it

left off.

If the machine is switched off at the

main switch

(or in the event of a power cut) before the wash-

ing program has been completed, the interrupt-

ed program will continue when the power comes

back on.

Note!

If the power is switched off, or if the door is open

during drying, the program is interrupted.

Standby mode

Once the machine has finished, it only

draws standby current. Should you wish to dis-

connect the power completely, just switch off at

the main power switch. Turn off the water faucet

if the machine is not to be used for an extended

period, such as during vacations, for example.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

No comments

Asko D5223 Operations Instructions Page 11