Asko D5223 Operations Instructions download pdf (Page 29)

Customer Care Center

1-800-898-1879

www.askousa.com

wATER CONNECTION

• The machine can be connected to a cold or

hot water supply (maximum 140°F, 85°C).

However, we recommend connection to a

cold water supply.

• The inlet pipe has a connector with either a

9/16” internal thread.

ElECTRICAl CONNECTION

• 120VAC mains voltage, minimum 15A.

dRAINAgE

• The supplied cone-shaped connector fits a

drain connection with an internal diameter of

1/2, 5/8, 23/32 and 7/8 inches (13, 16, 18 and

22 mm).

• Use a hose clamp if connecting to a fixed drain

(sink).

The connector is ready to cut to the desired

drain connection size. Only a clamp is required.

CAblE/hOSE lENgThS

Drain hose: 59 inches (1930 mm)

Supply hose: 64 inches (1670 mm)

Power cable: 45 inches (1770 mm)

TOOLS

1) Flathead screwdriver

2) Open-ended wrench

5/8 inches (16 mm)

3) Tape measure

4) Spirit level

Installation and connection information

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

No comments

Asko D5223 Operations Instructions Page 29