Asko D5534XXLF Operations Instructions download pdf (Page 8)

Quick

This program is used for glasses and porcelain that is lightly

soiled, such as coffee cups.

Super Quick

Short program lasting about 15 minutes with acceptable results

for very lightly soiled dishes.

Delicate

If the dishes are only lightly soiled, you can select Delicate. This

program is intended for glasses and porcelain that have just been

used and as such do not require such a powerful program.

This program can be used for fragile dishes. Select Short dry if

you want to be especially cautious. See also the section Fragile

dishes in the chapter Loading the dishwasher.

Eco

Use when you want to save energy. For normally soiled dishes.

Rinse & Dry

This program consists of a rinse with heating and drying. This is

a suitable program if, for example, you plan to make jam and

want to rinse and heat clean glass jars.

Rinse & Hold

Use to rinse dishes while you wait for the dishwasher to become

fully loaded.

Selecting Options

To select an option, press one of the option buttons. The field

under the button lights when the option is activated. The available

options depend on the selected program. Once you have started

the program, the options you selected are saved for the next time

you use the same program. An exception is the Delayed start

option.

High temperature

Activate this option for improved dishwashing results. The

machine then uses a higher temperature for the main wash.

If you want to use the lower temperature, press again so that the

field under the button turns off.

You can vary the temperature as shown below:

130 °F (55 °C) / 160 °F (70 °C)Sanitation:

130 °F (55 °C) / 150 °F (65 °C)Normal:

140 °F (60 °C)/150 °F (65 °C)Heavy:

85 °F (30 °C) / 140 °F (60 °C)Quick:

85 °F (30 °C) / 140 °F (60 °C)Super Quick:

105 °F (40 °C) / 120 °F (50 °C)Delicate:

120 °F (50 °C) / 140 °F (60 °C)Eco:

Long dry

A higher temperature in the final rinse and a longer drying phase

improves the drying result if you activate the Long dry option.

This causes a slight increase in energy consumption. This option

can be used with all programs except Rinse & Dry and Rinse &

Hold.

If you want a program with Short dry, press again so that the field

under the button turns off.

Delayed start

When you select Delayed start, the dishwasher will start 1-24

hours after you press the Start/Stop button.

1 Press the button once to activate Delayed start. Press the

button several times – or hold it in – to set the desired number

of hours.

2 Press Start/Stop and the dishwasher counts down 1 hour at

a time and starts after the selected delay.

Press and hold Start/Stop for three seconds if you want to cancel

the Delayed start option.

NOTE!

Remember to press the Start/Stop button to start the program.

Start the dishwasher

Press and hold Start/Stop until the display shows (the door

open symbol). This indicates that the dishwasher is ready to start.

Close the door properly, otherwise the dishwasher will not start.

NOTE!

If the machine does not start within 2 minutes of the last button

press, the display returns to showing the last program run.

Time remaining

Once you have selected a program and options, the display

indicates how long the program took the last time it was used.

The remaining time is updated after the water for the final rinse

has been heated.

This may differ somewhat from time to time depending on the

temperature of the water supply, the amount of dishes, the

ambient temperature, and other factors.

Customer Care Center 1-800-898-1879

www.askona.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments

Asko D5534XXLF Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for Dishwashers Asko D5534XXLF