Asko D5534XXLF Operations Instructions download pdf (Page 4)

Before washing for the

first time

Water supply

The machine can be connected to either a hot (max. 160 °F, 70

°C) or cold water supply. We recommend a cold water supply.

The water pressure should be 4.2-140 psi. See also the section

Economic dishwashing in the chapter Loading the dishwasher.

Program key

Some dishwashers include program keys in different languages.

Attach the program key in the appropriate language to the top

of the door.

Checking water hardness

Contact the local water utility to check the water hardness in your

area. This is important to determine how much detergent and

rinse aid to use.

Top up with rinse aid

Drying is faster if you use rinse aid.

1 Open the rinse aid compartment lid.

2 Carefully top up with rinse aid. Only add rinse aid to the level

marked max.

3 Wipe up any spilled rinse aid around the compartment.

4 Close the lid firmly.

Selecting the rinse aid dosage

Rinse aid dispensing can be set from (Off) to (High

dose). (Factory settings:

)

Increase the rinse aid dosage:

• If the dishes have water marks.

Reduce the rinse aid dosage:

• If the dishes have a sticky white/blue film.

• If the dishes are streaked.

• Heavy foaming. If you have very soft water, the rinse aid can

be diluted 50:50 with water.

Setting the rinse aid dosage

The section Settings describes how to set the rinse aid dosage.

Refill rinse aid indicator

When the rinse aid needs topping up, the above symbol lights

on the display.

NOTE!

After topping up, it may take a while before the symbol goes

out.

Customer Care Center 1-800-898-1879

www.askona.com

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Asko D5534XXLF Operations Instructions Page 4

Comments to this Manuals

Related products and manuals for Dishwashers Asko D5534XXLF