Asko T793C Operations Instructions download pdf (Page 26)

C. Built-in

ASKO dryers can be installed beneath a cabinet

or worktop with a minimum height of 34” (864

mm). There must be a gap of about 1/2” (12 mm)

all around the machine, including between the

rear edge of the machine top panel and the back

wall. The opening width must be at least 24-1/2”

(622 mm). The condensing models work best

when they have good air circulation. Install the

dryer so the condensed water will continuously

flow into a drain or sink, you will need a drain

outlet behind the unit. The maximum drain height

is 40” (1016 mm).

Notes

The height adjustment for the dryer is 33-1/2” to

34-1/2” (850 mm to 876 mm). Do not raise it

higher than 34-1/2” (876 mm). Hole measure-

ments are from center of hole.

Customer Care Center26

1-800-898-1879

www.askousa.com

Installation instructions

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Comments to this Manuals

No comments