Asko T793C Operations Instructions download pdf (Page 21)

The machine will not start

Check

•

that the door is properly closed.

•

that the main power switch is on.

•

that the Delayed Start option has not been se-

lected. To cancel Delayed Start, press the Stop

button for 3 seconds.

•

that any plug is connected.

•

that the fuses (circuit breakers) in your house

are intact. Flip the dryer breaker off and then

back on to make sure. You can not always tell

from the outside if the circuit breaker has

tripped.

•

that the overheating cut-off has not been trig-

gered (see below).

Overheating cut-off

The overheating cut-off shuts off the tumble dryer

if the temperature is too high, caused by lint

clogging the lint filter, for instance.

•

Clean the filter.

•

Check that the condenser is clean. Clean it if

necessary. See the "Care and cleaning"

chapter.

•

The overheating cut-off will reset automatically

once the machine has cooled down.

Drying takes too long

•

Check that the lint filter and the condenser are

not blocked. See the "Care and maintenance"

chapter.

•

Prolonged drying times may also be due to the

tumble dryer being located in a confined space

or room that is too small, causing the air to

become too hot.

•

Make sure that the tumble dryer has access

to more cold air, by opening doors and/or win-

dows, for example.

The laundry does not dry, or is too

dry

•

The door has been opened while the program

is running, which disrupts the moisture monitor-

ing function.

Error messages

•

If Overflow is shown in the display, the con-

denser drain hose could be blocked. Remove

the hose from the drain and check for obstruc-

tions. The hose should be inserted no more

than 5 or 6 inches into the wall drain.

•

If "Max Program Time" appears on the display,

the maximum program time has been reached.

Read "Drying takes too long" in the "Trou-

bleshooting" chapter to find out what to do.

•

If "Clean lint filter" appears on the display,

clean the lint filter.

•

If "Clean condenser" appears on the display.

See the "Cleaning the condenser" section of

the "Care and cleaning" chapter for remedy

•

Press the Stop button to close error messages.

21Customer Care Center

1-800-898-1879

www.askousa.com

Troubleshooting

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Comments to this Manuals

No comments