Asko 461622 Use and Care Guide download pdf (Page 8)

8

Customer Care Center

1-800-898-1879

www.askona.com

Advice and tips before you tumble dry

Here are some tips that may help you before

you begin tumble drying.

Have the clothes been spun?

Items to be tumble dried should be spun at 1000

rpm or faster. Higher spin speeds save energy

and reduce drying time.

Materials that can be tumble dried

This symbol means that the material is

suitable for tumble drying. Fabrics best suited

to tumble drying are cotton fabrics, terry cloth,

and synthetic bers. Garments will be softer and

lighter when tumbled than when hung out to dry.

NOTE!

The tumble dryer does not cause any signicant

wear on fabrics. The lint trapped in the lint lter

consists of dust and ber residues formed when

the items are used.

Materials that should not be tumble

dried

This symbol means that the material is not

suitable for tumble drying. Certain materials

may melt or become a re hazard if exposed to

heat and others can lose their shape or shrink.

And do not tumble dry

• materials labeled "Do not dry near heat".

• garments that have been dry-cleaned at

home.

• plastic foam.

• berglass material.

• wool must not be tumble dried due to the risk

of piling.

Static electricity

To reduce the risk of static electricity in the

laundry after tumble drying, you can:

• Use fabric softener when washing.

• Wait ve minutes after the drying program

ends before opening the door and removing

the laundry from the dryer.

NOTE!

You can stop the tumble dryer by pressing the

Stop button for three seconds or by opening the

door. In both cases the program is stopped and

starts from the beginning if restarted.

If you do not want to restart the program,

immediately remove all laundry and spread it

out to allow the heat to dissipate.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments