Asko 461622 Use and Care Guide download pdf (Page 16)

16

Customer Care Center

1-800-898-1879

www.askona.com

Troubleshooting

The machine will not start

Check:

• that the door is properly closed.

• that the main power switch is on.

• that the Delayed Start option has not been

selected. To cancel Delayed Start, press the

Stop button for three seconds.

• that any plug is connected.

• that the house fuses or circuit breaker have

not been tripped.

• that the overheating cut-out has not been

triggered.

The machine loses all power during a

program

The overheating cut-o shuts o the tumble

dryer if the temperature is too high, caused by

lint clogging the lint lter, for instance.

• Clean the lint lter.

• Check that the condenser is clean. Clean it

if necessary. See the Care and maintenance

instructions chapter.

• Wait until the machine has cooled, then try

starting it. If it still does not start: Call the

Customer Care Center.

Drying takes too long

• Check that the lint lter is not blocked. See

the Care and maintenance instructions

chapter.

• Check that the condenser is not blocked.

See the

• Care and maintenance instructions chapter.

• Prolonged drying times may also be due to

the tumble dryer being located in a conned

area or in a room that is too small, causing

the air to become too hot.

• Make sure that the tumble dryer has access

to more cold air, open doors and/or windows,

for example.

Error messages

If F30 is ashing on the display, the maximum

permitted program time has been reached.

Check that the lint lter and the condenser are

not blocked. See the Care and maintenance

instructions chapter.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments