Asko T743 Operations Instructions download pdf (Page 13)

Cleaning the lint filter

The lint filter must be cleaned after each load. If

you have very hard water, this can cause

limescale deposits in the lint filter. Check for any

limescale deposits when cleaning the lint filter

and, if necessary, wash the filter by hand.

Additionally, the filter should be cleaned with hot

water, detergent, and a soft brush quarterly.

Grasp the filter handle and pull it toward you.

Pull the filter out of its holder.

Open the filter and remove the lint from all

sides of it by hand. Use a soft, dry cloth to

remove any deposits.

Replace the filter in its holder.

NOTE!

If you have hard water, the filter should be

washed with water to remove any limescale

deposits. Use a sponge and a little dishwashing

detergent if necessary. Dry the filter carefully

with a towel. If you cannot remove the limescale,

you can buy a new filter from the retailer where

you bought the tumble dryer.

Cleaning the outside of the machine

Clean the outside of the machine and the program

panel with a mild cleaner. Do not use solvents,

as these can damage the machine. Do not hose

down or spray the machine with water.

NOTE!

Do not allow dust to accumulate around the

machine. Keep the area around the tumble dryer

clean and cool; dust, heat, and moisture prolong

drying times.

13Customer Care Center

1-800-898-1879

www.askousa.com

Care and maintenance instructions

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Asko T743 Operations Instructions Page 13