Asko DC7583 Operations Instructions download pdf (Page 21)

The machine will not start

Check

•

that the door is closed correctly.

•

that the main power switch is on.

•

that the machine is not programmed to start at

a specific time (e.g. 13.30)

•

that the plug is connected.

•

that the fuses (circuit breakers) in your house

are intact. Swap two circuit breakers over to

make sure. You cannot always tell from the

outside if a circuit breaker is broken.

•

that the overheating cut-out has not been

triggered (see below).

Overheating cut-out

The overheating cut-out shuts off the dryer cabinet

if the temperature is too high.

•

The overheating cut-out will reset automatically

once the machine has cooled down.

Drying takes too long

•

Poorly spun or very wet washing.

•

The dryer cabinet is positioned in an area

where the ambient temperature is too low.

The garments do not dry, or are too

dry

•

The door has been opened while the program

is running, which disrupts the moisture

monitoring function.

•

The garments may not have been hung

correctly, obstructing the air flow. See

“Garment placement” in the “Operation”

chapter.

•

Wrong program selected, choose another

program, see the chapter “Operation”.

•

Poorly spun wash or very wet washing.

•

The ventilation pipe/hose is too long. The

length should not exceed 1 m.

•

Normal operation requires installation in a room

with a temperature above 0 °C.

Error messages

If F2 flashes on the display, the maximum

permitted program time has been reached. Read

"Drying takes too long" in the "Troubleshooting"

chapter to find out what to do.

21

Troubleshooting

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments