Asko T793 User Manual download pdf (Page 18)

The machine will not start

Check

• that the door is properly closed.

• that the main power switch is on.

• that the Delayed Start option has not been

selected. To cancel Delayed Start, press

the Stop button for 3 seconds.

• that the machine is not programmed to

start at a specific time (e.g., 13.30)

• that any plug is connected.

• that the fuses (circuit breakers) in your

house are intact. Flip the dryer breaker off

and then back on to make sure. You can

not always tell from the outside if the circuit

breaker has tripped.

• that the overheating cut-off has not been

triggered (see below).

Overheating cut-off

The overheating cut-off shuts off the tumble

dryer if the temperature is too high, caused

by lint clogging the lint filter, for instance.

• Clean the filter.

• The overheating cut-off will reset automat-

ically once the machine has cooled down.

Drying takes too long

• Check that the lint filter is not clogged (see

the "Care and maintenance" chapter).

The laundry does not dry, or is too

dry

• The door has been opened while the pro-

gram is running, which disrupts the mois-

ture monitoring function.

Error messages

• If "Max Program Time" appears on the

display, the maximum program time has

been reached. Read "Drying takes too

long" in the "Troubleshooting" chapter to

find out what to do.

• If "Clean lint filter" appears on the display,

clean the lint filter.

• If "Clean condenser" appears on the dis-

play. See the "Cleaning the condenser"

section of the "Care and cleaning" chapter

for remedy

• Press the Stop button to close error mes-

sages.

Customer Care Center18

1-800-898-1879

www.askousa.com

Troubleshooting

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments