Asko D5122 Operations Instructions download pdf (Page 20)

20

Customer Care Center

1-800-898-1879

www.askousa.com

Rinse aid

Open

Closed

Refill indicator

Cover for rinse aid

Open by turning and lifting the cover!

Adding rinse aid

In some cases, drying can be made more ef-

ficient by using rinse aid.

To fill with rinse aid:

1. Turn and lift up the cover of the rinse aid

compartment to the right of the dispenser.

This is where you top up and set the amount

of rinse aid to be dispensed in each wash.

2. Carefully pour in rinse aid up to the dos-

age setting knob.

Alter dosage if required. Do not forget to

close the cover.

Machines with refill indicator

There is a refill indicator in the middle of the

dispenser (see illustration). If the refill indi-

cator is totally black, there is sufficient rinse

aid. However, if the indicator has a more

transparent appearance, you need to fill up

with rinse aid (see above).

Select dosage

The dispenser is usually set at 1= soft water.

However, depending on the water hardness,

you may need to change the dosage.

Open the rinse aid cover. Here you will find

the dispenser’s adjustment dial. Settings 1-6:

the harder the water, the higher the dosage.

When the water hardness exceeds 3 grains,

you should use rinse aid with citric acid (acid

rinse aid).

Too much rinse aid can lead to the build-

up of foam. If your water is particularly soft,

you can dilute the rinse aid (1 part rinse aid,

1 part water).

Too much rinse aid can cause streaks on

the dishes, while too little can result in water

stains.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments